Component - PlasticsE41871
BASF SE
Performance Materials Europe, PMD/EX ¿ H201, Ludwigshafen 67056 DE
A3EG7(t)(f1), A3EG7 FC Aqua, A3EG7 CCYD(f1)
Polyamide 66 (PA66) "Ultramid", furnished as pellets

Color
Min. Thk
(mm)
Flame
Class

HWI

HAI
RTI
Elec
RTI
Imp
RTI
Str
ALL0.75HB41120--
1.5HB30120120130
3.0HB00120120130
6.0HB00120120130
Comparative Tracking Index (CTI):0Inclined Plane Tracking (IPT) kV:-
Dielectric Strength (kV/mm):25Volume Resistivity (10x ohm-cm):12
High-Voltage Arc Tracking Rate (HVTR):1Surface Resistivity (10x ohms/square):-
Dimensional Stability (%):0High Volt, Low Current Arc Resis (D495):5
(f1) - Suitable for outdoor use with respect to exposure to Ultraviolet Light, Water Exposure and Immersion in accordance with UL 746C.
(t) - May be followed by the letters LS and a color code indicating laser sensitive coloring.
ANSI/UL 94 small-scale test data does not pertain to building materials, furnishings and related contents. ANSI/UL 94 small-scale test data is intended solely for determining the flammability of plastic materials used in the components and parts of end-product devices and appliances, where the acceptability of the combination is determined by UL.
Report Date:1980-05-30© 2021 UL LLC
Last Revised:2021-04-29

IEC and ISO Test Methods
Test NameTest MethodUnitsThk (mm)Value
FlammabilityIEC 60695-11-10Class (color)0.75HB, HB75 (ALL)
1.5HB, HB75 (ALL)
3.0HB, HB40 (ALL)
6.0HB, HB40 (ALL)
Glow-Wire Flammability (GWFI)IEC 60695-2-12°C--
Glow-Wire Ignition (GWIT)IEC 60695-2-13°C--
IEC Comparative Tracking IndexIEC 60112Volts (Max)--
IEC Ball PressureIEC 60695-10-2°C--
ISO Heat Deflection (1.80 MPa)ISO 75-2°C--
ISO Tensile StrengthISO 527-2MPa--
ISO Flexural StrengthISO 178MPa--
ISO Tensile ImpactISO 8256kJ/m2--
ISO Izod ImpactISO 180kJ/m2--
ISO Charpy ImpactISO 179-1kJ/m2--

zurück

Download PDF